top of page

The VMO16 brings all the benefits and experience of our live sound filters and dynamics algorithms to an installation product. The 16 inputs from the Dante network go to a full 16x16 matrix mixer allowing any Dante networked inputs to be routed to any analogue output channel. All of the 16 analogue outputs have 16 bands of parametric EQ, 48dB/ Oct high and low pass filters, up to 1.3 seconds of delay as well as our high performance, two-stage PXL limiters for high performance loudspeaker protection.

 

All analogue audio connections are on Phoenix-type 3-pin 5.08mm pitch connectors. The 4 GPI connections allow configurable actions such as fire alarm mutes and preset recalls. Up to 30 presets can be stored with recall options allowing selective recall combinations of input, matrix and output sections.

 

Our D-Net control software for PC, Mac and iPad gives you complete control over ethernet amd wifi. The VMO16 is also fully compatible with our VR1 PoE remote control panel for simple, flexible user control. Control via third party systems such as Crestron™ is available via our simple ethernet control protocol.

NST VMO16 Audio Installation Processor

SKU: VMO16
£2,845.00 Regular Price
£2,276.00Sale Price
  • Analogue Outputs – 16 Electronically Balanced, Phoenix connectors
    Maximum Level >20dBu
    Dynamic Range >119dB (20Hz – 20kHz A-weighted)

    Performance

    Frequency Response (20Hz to 20kHz) : +/-0.05dB
    THD + N (-10dB @ 1kHz) : 0.0005%
    Latency : 0.283ms

    Processing [96kHz]

    Output Parametric EQ (per channel): 16 bands – parametric, low shelf, high shelf, notch, band-pass
    Output High-Pass and Low-Pass Filter (per channel) : Up to 48dB/octave (Bensen / Butterworth / Bessel / Linkwitz-Riley)
    Output Gain (per channel) : -30 to +15dB in 0.1dB steps, mute, phase
    Output Delay (per channel) : 0 to 1.3s in 10.4uS steps
    Output Limiter (per channel) : Threshold (-50 to +22dBu), attack, release, auto attack/release option

    Presets : Up to 30

    Networked Audio : 16 input Dante channels on dual redundant RJ45 connectors

    Comms : 100Mbps Ethernet on rear panel (RJ45 connector)

    Power Requirements

    3-pin IEC input, fused
    90-250VAC, 50-60Hz < 40W

    Dimensions

    Height : 44mm (1.75inch) 1U
    Depth : 170mm (6.75 inches)
    Width : 482mm (19 inches)

    Weight

    Net : 2.2kg
    Shipping : 3.4kg

    Due to continuing product improvement the above specifications are subject to change.

PRICES EXCLUDE VAT

Product Rating

average rating is 3 out of 5, based on 150 votes, Product review(s)

There are no reviews yet, be the first!

Thanks for submitting a review! 😘

Add Review

Customer Reviews

LOAD MORE

Related Products

bottom of page